GS 350 RWD V6-3.5L (2GR-FSE) (2007)
SST 09570-24011
NOTICE:
^ Temporarily install the mount cushion to the member in order to prevent it from tilting and install the SST.
^ Be sure to use the SST with the correct combination.
^ Make sure that the SST contacts the entire circumference of the mount cushion.
27. INSTALL NO.2 REAR DIFFERENTIAL MOUNT CUSHION
(a)
Using SST, install the No.2 rear differential mount cushion.
SST 09570-24011
NOTICE:
^ Temporarily install the mount cushion to the member in order to prevent it from tilting and install the SST.
^ Be sure to use the SST with the correct combination.
^ Make sure that the SST contacts the entire circumference of the mount cushion.
28. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
29. INSTALL REAR SUSPENSION MEMBER ASSEMBLY
(a)
Support the rear suspension member along with the differential using a jack.
HINT: Install the rear suspension member along with the rear differential carrier assembly.
(b) Install the 2 rear suspension member stoppers and 2 differential support member stoppers to the rear suspension member.
(c)
Install the rear suspension member along with the rear suspension member stopper lower with the 8 bolts.
Torque: 127 N*m (1,300 kgf*cm, 94 ft.*lbf) (Bolt A)
Torque: 19 N*m (195 kgf*cm, 14 ft.*lbf) (Bolt B)