GS 350 RWD V6-3.5L (2GR-FSE) (2007)
30. INSTALL REAR SUSPENSION MEMBER BRACE REAR LOWER LH
(a)
Install the suspension member brace rear lower LH with the 4 bolts.
Torque: 19 N*m (195 kgf*cm, 14 ft.*lbf)
31. REMOVE REAR SUSPENSION MEMBER BRACE REAR LOWER RH
(a)
Install the suspension member brace rear lower RH with the 4 bolts.
Torque: 19 N*m (195 kgf*cm, 14 ft.*lbf)
32. CONNECT HEIGHT CONTROL SENSOR REAR LH
(a)
Install the clamp to the rear suspension member.
(b) Connect the height control sensor connector.
33. INSTALL REAR FLOOR SIDE MEMBER COVER LH
(a)
Install the side member cover LH with the 3 screws.
34. INSTALL REAR FLOOR SIDE MEMBER COVER RH
HINT: Installation procedure of the RH side is the same as that of the LH side.
35. INSTALL REAR DRIVE SHAFT ASSEMBLY LH
36. INSTALL REAR DRIVE SHAFT ASSEMBLY RH
HINT: Installation procedure of the RH side is the same as that of the LH side.
37. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.3
38. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.2
HINT: Installation procedure of the RH side is the same as that of the LH side.
39. INSTALL REAR SUSPENSION MEMBER BRACE LH
40. INSTALL REAR SUSPENSION MEMBER BRACE RH