GS 350 RWD V6-3.5L (2GR-FSE) (2007)
Seals and Gaskets: Service and Repair
REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL
COMPONENTS
REPLACEMENT
1. REMOVE REAR TIRE
2. DRAIN DIFFERENTIAL OIL
(a)
Using a hexagon wrench (10 mm), remove the filler plug and gasket.
(b) Using a hexagon wrench (10 mm), remove the drain plug and gasket, and drain the oil.
(c)
Install the differential drain plug and a new gasket.
Torque: 49 N*m (500 kgf*cm, 36 ft.*lbf)
3. REMOVE REAR DRIVE SHAFT