GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
a. Connect the speaker connector.
b. Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.
c. Install the speaker with the 2 bolts.
NOTE: Do not touch the cone part of the speaker.
2. INSTALL NO.2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
a. Attach the 2 clips and 2 claws to install the panel.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.