GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Disposal
DISPOSAL
DISPOSE OF BRAKE ACTUATOR ASSEMBLY
Using a drill, slowly make a hole at the circumference made by the center points of A and discharge the gas.
CAUTION: Be sure to wear protective glasses as fragments may fly out due to pressure.
HINT:
-
The hole may be drilled up to approximately 5 to 10 mm (0.197 to 0.394 in.) away from the point indicated by A.
-
The gas is nitrogen which is colorless, odorless, and harmless.