GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
REMOVE BRAKE ACTUATOR ASSEMBLY
Remove the 2 nuts and brake actuator from the actuator bracket.
REASSEMBLY
INSTALL BRAKE ACTUATOR ASSEMBLY
Install the actuator to the actuator bracket with the 2 nuts.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
NOTE: Do not remove the hole plugs before connecting the brake tubes because a new brake actuator is filled with brake fluid.