GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
Radiator: Removal and Replacement
Sub Radiator
REMOVAL
1. REMOVE CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE ENGINE UNDER COVER
3. REMOVE NO. 2 ENGINE UNDER COVER
4. REMOVE COOL AIR INTAKE DUCT SEAL
5. REMOVE ENGINE ROOM SIDE COVER LH
6. REMOVE ENGINE ROOM SIDE COVER RH
7. DRAIN COOLANT (for Inverter)
8. REMOVE FRONT FENDER LINER LH
9. REMOVE FRONT FENDER LINER RH
10. REMOVE FRONT BUMPER COVER
11. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
12. REMOVE HOOD LOCK CONTROL CABLE COVER
13. REMOVE HOOD LOCK ASSEMBLY
14. REMOVE UPPER RADIATOR SUPPORT SUBASSEMBLY
15. REMOVE RADIATOR ASSEMBLY
a. Remove the 2 clips and disconnect the 2 water hoses.
b. Remove the 6 bolts and radiator assembly.
INSTALLATION
1. INSTALL RADIATOR ASSEMBLY