GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
2. CONNECT DISCHARGE HOSE SUB-ASSEMBLY
a. Remove the vinyl tape attached to the pipe and connecting part of the cooler condenser.
b. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pipe joint.
Compressor oil: ND-OIL 11 or equivalent
c. Install the O-ring on the discharge hose.
d. Connect the discharge hose to the cooler condenser with the bolt.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
3. CONNECT LIQUID TUBE SUB-ASSEMBLY
a. Remove the vinyl tape attached to the pipe and connecting part of the cooler condenser.
b. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pipe joint.
Compressor oil: ND-OIL 11 or equivalent
c. Install the O-ring on the liquid tube.
d. Connect the liquid tube to the cooler condenser with the bolt.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
4. INSTALL RADIATOR ASSEMBLY