GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
b. Install the fuel vapor containment valve with the 2 nuts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
c. Connect the 2 fuel tank vent hoses to the fuel vapor containment valve.
1. Push the vent hose into the fuel vapor containment valve port and push the retainer to lock it.
NOTE:
-
Check for damage or foreign objects on the connected part.
-
After connecting, check that the vent hose and the valve are securely connected by pulling on them.
d. Connect the connector and clamp.
2. INSTALL NO. 2 DIFFERENTIAL SUPPORT PROTECTOR
a. Install the protector with the 2 nuts.
3. INSTALL FUEL TANK CAP
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INSTALL SERVICE PLUG GRIP
6. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.