GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
NOTE:
-
Do not use any tools in this procedure.
-
Check for any dirt and foreign matter contamination in the valve and around the connector. Clean if necessary. Foreign matter may
damage the O-rings or cause leaks in the seal between the valve and connector.
HINT: Do not remove the retainer.
2. Disconnect the fuel tank vent hose.
c. Remove the 2 nuts from the fuel vapor containment valve with bracket.
d. Remove the 2 nuts and vapor containment valve from the bracket.
INSTALLATION
1. INSTALL FUEL VAPOR CONTAINMENT VALVE
a. Install the fuel vapor containment valve to the bracket with the 2 nuts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)