GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
_hybrid/Page-960002.png)
c. Using a screwdriver with the tip taped, detach the 3 claws and remove the sub-tank.
d. Using a clip remover with the tip taped, remove the jet pump.
NOTE: The O-ring is installed firmly between the jet pump and sub-tank. Therefore, the jet pump and sub-tank should be removed carefully
using a clip remover.
10. REMOVE FUEL PUMP ASSEMBLY
a. Disconnect the 2 connectors and terminal, and remove the fuel pump wire.
b. Using a screwdriver with the tip taped, detach the 2 claws from the claw holes and remove the fuel pump.
