GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
e. Install a new E-ring
7. INSTALL FUEL SENDER GAUGE ASSEMBLY
a. Set the fuel sender gauge to the sub-tank. Then slide the sender gauge downward to install it.
b. Connect the fuel sender gauge connector.
8. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
9. INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER
10. INSTALL ROOM NO. 3 PARTITION PAD
11. INSTALL REAR SEAT CUSHION ASSEMBLY
12. INSTALL SERVICE PLUG GRIP
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. CHECK FOR FUEL LEAKS
15. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.