GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
1. INSTALL STEERING RACK END SUB-ASSEMBLY
(a)
Install 2 new claw washers.
HINT:
Align the claws of the claw washer with the steering rack grooves.
(b) Using SST, install the steering rack end (RH side).
SST 09922-10010
Torque: 76 N*m (775 kgf*cm, 56 ft.*lbf)
HINT:
^
Use SST 09922-10010 following the direction shown in the illustration.
^
Use a torque wrench with a fulcrum length of 345 mm (13.58 in.)
^
Using SST, hold the steering rack and install the steering rack end.
(c)
Using SST, install the steering rack end (LH side).
SST 09922-10010
Torque: 76 N*m (775 kgf*cm, 56 ft.*lbf)
HINT:
^
Use SST 09922-10010 following the direction shown in the illustration.
^
Use a torque wrench with a fulcrum length of 345 mm (13.58 in.)
^
Using SST, hold the steering rack and install the steering rack end.
(d) Using a brass bar and a hammer, stake the 2 claw washers.
NOTICE:
Avoid any impact to the steering rack.