GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(h) Release the lock lever of the connector as shown in the illustration. Disconnect the connector from the oil pump motor controller.
(i)
Remove the 2 bolts, clamp and oil pump motor controller with bracket.
NOTICE:
Do not drop the oil pump motor controller.
(j)
Remove the 3 bolts and oil pump motor controller.
INSTALLATION
CAUTION:
Be sure to perform the procedure as described below. Do not turn the power switch on (READY) before the cable has been connected to the
negative battery terminal.