GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
1. INSTALL OIL PUMP MOTOR CONTROLLER
(a)
Install the oil pump motor controller with the 3 bolts.
Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf)
(b) Install the oil pump motor controller with bracket with the 2 bolts.
Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
(c)
Connect the clamp.
(d) Connect the connector and securely lock the lock lever as shown in the illustration.
NOTICE:
^
Be sure to securely lock the claw of the connector.
^
Push the connector all the way in and lock the lock lever.
HINT:
When the connector is pushed all the way in, the lock lever will move slightly to the lock position.