GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(b) Inspect the flexible coupling centering bushing.
HINT:
If the bushing is damaged, replace the propeller shaft.
2. REMOVE PROPELLER INTERMEDIATE SHAFT
(a)
Put matchmarks on the intermediate shaft and propeller shaft.
(b) Separate the intermediate shaft and propeller shaft.
NOTICE:
Be careful not to damage the spline.
(c)
Remove the adjusting nut from the intermediate shaft.
(d) Remove the dust boot from the propeller shaft.
HINT:
If the dust boot is to be reused, remove it after wrapping vinyl tape around the spline, so it will not be damaged.