GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
7. REMOVE REAR AXLE SHAFT NUT
(a)
Using SST and a hammer, release the staked part of the axle shaft nut.
SST 09930-00010
NOTICE:
Release the staked part of the nut completely, otherwise the threads of the drive shaft may be damaged.
(b) While depressing the brake pedal, remove the axle shaft nut.
8. REMOVE REAR SPEED SENSOR
(a)
Remove the 2 bolts and speed sensor from the axle carrier.
NOTICE:
^
Be careful not to damage the speed sensor.
^
Prevent foreign matter from adhering to the speed sensor.
9. DISCONNECT REAR DISC BRAKE CALIPER ASSEMBLY
(a)
Remove the 2 bolts and disconnect the rear disc brake caliper.
NOTICE:
Use a wire or an equivalent to keep the brake caliper from hanging down by the flexible hose.
(b) Remove the caliper plates from the brake caliper.
10. REMOVE REAR DISC
11. REMOVE REAR UPPER NO. 2 CONTROL ARM ASSEMBLY
12. REMOVE REAR UPPER NO. 1 CONTROL ARM ASSEMBLY
13. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY
14. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY