HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Antenna - Keyless Entry: Service and Repair
Electrical Key Oscillator (for Front Floor)
Components
THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Front Floor): COMPONENTS
Removal
THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Front Floor): REMOVAL
1. REMOVE FRONT CONSOLE BOX COVER See: Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Removal
2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (w/o Seat Heater System) See: Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Removal
3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (w/ Seat Heater System) See: Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Removal
4. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY See: Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Removal
5. REMOVE ELECTRICAL KEY OSCILLATOR
(a) Disengage the clamp.
(b) Disconnect the connector and remove the electrical key oscillator.
NOTICE:
Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.
Installation