HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Front Floor): INSTALLATION
1. INSTALL ELECTRICAL KEY OSCILLATOR
(a) Connect the connector.
(b) Engage the clamp and install the electrical key oscillator.
NOTICE:
Be careful when installing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.
2. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY See: Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Installation
3. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (w/o Seat Heater System) See: Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Installation
4. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (w/ Seat Heater System) See: Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Installation
5. INSTALL FRONT CONSOLE BOX COVER See: Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Installation