HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
9. REMOVE COWL BODY MOUNTING REINFORCEMENT RH See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
10. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Removal
11. REMOVE STEERING POST ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)
(a) Remove the steering post assembly See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column Assembly
(for Manual Tilt and Manual Telescopic Steering Column)/Removal.
12. REMOVE STEERING POST ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)
(a) Remove the steering post assembly See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column Assembly
(for Power Tilt and Power Telescopic Steering Column)/Removal.
13. DISCONNECT SUCTION PIPE SUB-ASSEMBLY
(a) Remove the bolt and slide the hook connector.
(b) Disconnect the suction pipe assembly.
(c) Remove the O-ring from the suction pipe sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
14. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
(a) Disconnect the air conditioning tube and accessory assembly.
(b) Remove the O-ring from the air conditioning tube and accessory assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
15. DISCONNECT OUTLET HEATER WATER HOSE
(a) Using pliers, grip the claws of the clip and slide the clip to disconnect the outlet heater water hose.
NOTICE:
*
Do not apply excessive force to the outlet heater water hose.
*
Prepare a drain pan or cloth in case the coolant leaks.
16. DISCONNECT INLET HEATER WATER HOSE
(a) Using pliers, grip the claws of the clip and slide the clip to disconnect the inlet heater water hose.