HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
NOTICE:
*
Do not apply excessive force to the inlet heater water hose.
*
Prepare a drain pan or cloth in case the coolant leaks.
17. REMOVE REAR NO. 1 HEATER REGISTER BEZEL (for LH Side)
(a) Disengage the 4 claws as shown in the illustration.
(b) Remove the 2 screws and rear No. 1 heater register bezel.
18. REMOVE REAR NO. 1 HEATER REGISTER BEZEL (for RH Side)
HINT
Use the same procedure for the RH side and LH side.
19. REMOVE REAR NO. 6 AIR DUCT
(a) Disengage the 2 guides and 4 claws, and remove the rear No. 6 air duct.
20. REMOVE REAR NO. 5 AIR DUCT
HINT
Use the same procedure for the rear No. 5 air duct and rear No. 6 air duct.
21. REMOVE REAR NO. 4 AIR DUCT
(a) Disengage the 2 claws to open the 2 door scuff plate clamps as shown in the illustration.
(b) Remove the 2 clips.