HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Tire Pressure Module: Service and Repair
Installation
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ECU
(a) Engage the 2 claws to install the tire pressure warning ECU to the ECU integration box.
2. INSTALL ECU INTEGRATION BOX RH See: Power and Ground Distribution/Power Distribution Module/Service and Repair/Installation
3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation
4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Installation
5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation
6. INSTALL INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Upper Instrument Panel/Installation
7. INSTALL COWL SIDE TRIM BOARD RH See: Power and Ground Distribution/Power Distribution Module/Service and Repair/Installation
8. INSTALL FRONT DOOR OPENING TRIM COVER RH See: Power and Ground Distribution/Power Distribution Module/Service and
Repair/Installation
9. INSTALL FRONT DOOR SCUFF PLATE RH See: Power and Ground Distribution/Power Distribution Module/Service and Repair/Installation
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
(a) Connect the cable to the negative (-) battery terminal and close the front luggage compartment trim cover.
11. PERFORM DIAGNOSTIC SYSTEM CHECK
(a) Perform the diagnostic system check See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes/DTC Check / Clear.
12. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
13. REGISTER TRANSMITTER ID
(a) Register all transmitter IDs See: Testing and Inspection/Programming and Relearning/Registration.
14. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Initialization.
15. INSPECT TIRE PRESSURE WARNING SYSTEM
(a) Inspect the tire pressure warning system See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.