HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Thread pitch: 1.5 mm (0.0591 in.)
NOTICE:
Install the nuts to prevent damage to the hub bolts.
(b) Using SST and a screwdriver or an equivalent tool to hold the front axle hub sub-assembly, remove the front axle hub bolt.
SST : 09628-10011
NOTICE:
Do not damage the threads of the front axle hub bolts.
5. INSTALL FRONT AXLE HUB BOLT
(a) Install a washer and nut to a new front axle hub bolt as shown in the illustration.
Text in Illustration
Recommended service nut:
Thread diameter: 12.0 mm (0.472 in.)
Thread pitch: 1.5 mm (0.0591 in.)
HINT
Recommended thickness of the washer is 5 mm (0.197 in.) or more.
(b) Using a screwdriver or an equivalent tool to hold the front axle, install the hub bolt by tightening the nut.
NOTICE:
*
Install the nuts to prevent damage to the front axle hub bolts.
*
Do not damage the threads of the front axle hub bolts.
(c) Remove the 3 nuts and washer from the 3 front axle hub bolts.
6. INSTALL FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front
Brake/Installation
7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY
(a) Install the front disc brake caliper assembly to the steering knuckle with the 2 bolts.
Torque : 107 Nm (1089 kgf-cm, 79 ft-lbf)
NOTICE:
Do not twist the brake hose when installing the front disc brake caliper assembly.
8. INSTALL FRONT WHEEL
Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)