HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Standard Resistance:
NG -- CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 1 J/C - CAN J/C LH)
OK -- REPLACE COMBINATION METER See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Service and Repair/Removal and Replacement/Combination Meter/Removal
4. CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 1 J/C - CAN J/C LH)
(a) Reconnect the combination meter connector.
(b) Disconnect the wire harness connector from the CAN No. 1 junction connector upper side.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR OPEN IN CAN BUS WIRE (CAN J/C LH - CAN NO. 1 J/C)
OK -- Continue to next step.
5. CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 1 J/C - CAN J/C RH)
(a) Reconnect the wire harness connector to the CAN No. 1 junction connector upper side.
(b) Disconnect the wire harness connector from the CAN No. 1 junction connector lower side.
Text in Illustration