HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Collision Avoidance Module: Service and Repair
Removal
PRE-COLLISION: DRIVER MONITOR ECU: REMOVAL
1. REMOVE COOLER BLOWER ASSEMBLY
(a) Remove the cooler blower assembly See: Heating and Air Conditioning/Blower Motor/Service and Repair/Removal and
Replacement/Blower Unit (for Rear Side)/Removal.
2. REMOVE DRIVER MONITOR ECU ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 bolts.
(c) Disengage the 2 guides and remove the driver monitor ECU assembly.