HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Collision Avoidance Module: Service and Repair
Installation
PRE-COLLISION: DRIVER MONITOR ECU: INSTALLATION
1. INSTALL DRIVER MONITOR ECU ASSEMBLY
(a) Engage the 2 guides.
(b) Temporarily install the driver monitor ECU assembly with the 3 bolts.
(c) Tighten the 3 bolts in the order shown in the illustration to install the driver monitor ECU assembly.
(d) Connect the connector.
2. INSTALL COOLER BLOWER ASSEMBLY
(a) Install the cooler blower assembly See: Heating and Air Conditioning/Blower Motor/Service and Repair/Removal and Replacement/Blower
Unit (for Rear Side)/Installation.