HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. REMOVE ROOF HEADLINING ASSEMBLY
See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Removal
3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY
CAUTION:
When storing the curtain shield airbag assembly, keep the airbag deployment side facing upward.
(a) Check that the power switch is off.
(b) Check that the cable is disconnected from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(c) Using a screwdriver with the tip wrapped with protective tape, release the airbag connector lock and disconnect the curtain shield airbag
connector.
Text in Illustration
NOTICE:
When disconnecting any airbag connector, take care not to damage the airbag wire harness.
(d) Remove the 6 bolts.
Text in Illustration
(e) Remove the 3 clips.
(1) Using a clip remover, pull the 3 pins.