HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Dome Lamp Switch: Service and Repair
Installation
LIGHTING (INT): BACK DOOR COURTESY SWITCH: INSTALLATION
1. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
(a) Install the luggage compartment door lock assembly with the 2 bolts.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Engage the luggage door lock control cable sub-assembly.
(c) Connect the connector.
(d) Engage the 2 claws as shown in the illustration.
2. INSTALL LUGGAGE COMPARTMENT DOOR COVER See: Body and Frame/Spoilers, Flaps, and Air Dams/Spoiler/Service and Repair/Rear
Spoiler/Installation
3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH See: Body and Frame/Spoilers, Flaps, and Air
Dams/Spoiler/Service and Repair/Rear Spoiler/Installation
4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side.