HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(a) Remove the 2 bolts and disengage the 2 claws to remove the rear suspension arm cover from the rear No. 2 suspension arm assembly.
3. REMOVE REAR FLOOR SIDE MEMBER COVER LH (for LH Side)
(a) Remove the nut and bolt.
(b) Disengage the clip and remove the rear floor side member cover LH.
4. REMOVE REAR FLOOR SIDE MEMBER COVER RH (for RH Side)
(a) Remove the 2 bolts.
(b) Disengage the 2 clips and remove the rear floor side member cover RH.
5. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY
(a) Remove the nut.
(b) Install 2 spacers (SST spacer B) as shown in the illustration.
Text in Illustration
SST : 09960-20010
09961-02060
NOTICE:
As SST may be damaged, make sure that the clearance between the rear axle assembly and spacers is 1 mm (0.0394 in.) or more.
(c) Using SST, separate the rear No. 1 suspension arm assembly from the rear axle assembly as shown in the illustration.