HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
NOTICE:
Since a stopper nut is used, turn the bolt.
27. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
28. REMOVE REAR UPPER COIL SPRING INSULATOR LH See: Suspension Spring ( Coil / Leaf )/Service and Repair/Removal
29. REMOVE REAR UPPER COIL SPRING INSULATOR RH
HINT
Perform the same procedure as the LH side.
30. REMOVE REAR LOWER COIL SPRING INSULATOR LH See: Suspension Spring ( Coil / Leaf )/Service and Repair/Removal
31. REMOVE REAR LOWER COIL SPRING INSULATOR RH
HINT
Perform the same procedure as the LH side.
32. REMOVE REAR STABILIZER BAR See: Stabilizer Bar/Service and Repair/Rear Stabilizer Bar/Removal
33. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY
(a) Support the rear suspension member sub-assembly with a jack using 4 wooden blocks or equivalent tools as shown in the illustration.
Text in Illustration
NOTICE:
Make sure to secure the rear suspension member sub-assembly to prevent it from dropping.
(b) Remove the 2 bolts, 2 rear suspension member rear lower stoppers, 2 nuts (A), 2 nuts (B) and 2 rear suspension member lower stoppers.
Text in Illustration