HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
3. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Engage the grommet as shown in the illustration.
Text in Illustration
NOTICE:
Be careful not to damage the windshield when installing the windshield wiper motor and link assembly.
(b) Install the windshield wiper motor and link assembly with the 3 bolts.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(c) Engage the 2 clamps.
(d) Connect the connector.
4. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
(a) Engage the 8 guides (B) and 2 guides (C) as shown in the illustration.
(b) Engage the 6 claws and guide (A) to install the cowl top ventilator louver sub-assembly as shown in the illustration.
(c) Install the 2 clips.
5. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH
(a) Operate the wiper and stop the windshield wiper motor at the automatic stop position.
(b) When reusing the front wiper arm and blade assembly RH: