HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(1) Clean the wiper arm serrations.
Text in Illustration
(c) When reusing the windshield wiper link assembly:
(1) Clean the wiper pivot serrations with a wire brush.
(d) Install the front wiper arm and blade assembly RH with the 2 nuts to the position shown in the illustration.
Torque : 24 Nm (245 kgf-cm, 18 ft-lbf)
Text in Illustration
HINT
Hold the wiper arm by hand while tightening the nut.
6. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH
(a) When reusing the front wiper arm and blade assembly LH:
(1) Clean the wiper arm serrations.
Text in Illustration