IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-1810002.png)
NOTICE:
*
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching,
for example, the vehicle to prevent the electrical transmitter from being damaged.
*
Do not bend the electrodes while installing the battery.
*
Keep the interior of the transmitter case free of dust, water and oil.
(4) Install the cover by pressing down on it as shown in the illustration.
(c) for Type B:
(1) Disengage the claw and remove the slide transmitter housing cover as shown in the illustration.
(2) Remove the battery cover with 4 screws.
(3) Insert a precision screwdriver into the gap and remove the battery (lithium battery: CR1632).
NOTICE:
*
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching,
for example, the vehicle to prevent the electrical transmitter from being damaged.
*
Do not push the terminals with your finger.
*
Do not forcibly pry up the battery (lithium battery) because doing so will deform the terminals.
*
Do not touch the battery with wet hands. Water may result in corrosion.
*
Do not touch or move any components inside the transmitter because handling the components may interfere with proper
operation of the transmitter.
(4) Install a battery (lithium battery: CR1632) with the positive (+) side facing upward, as shown in the illustration.
