IS 250C V6-2.5L (4GR-FSE) (2011)
6. INSTALL REAR BUMPER LOWER SIDE RETAINER RH
HINT
Use the same procedure for the RH side and LH side.
7. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT LH
(a) Install the No. 1 rear bumper side support LH with the 2 screws and clip.
8. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT RH
HINT
Use the same procedure for the RH side and LH side.
9. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY
(a) Engage the claw.
(b) Install the rear bumper reinforcement sub-assembly with the 8 bolts.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
10. INSTALL REAR BUMPER ARM REINFORCEMENT LH
(a) Engage the 3 guides and 4 claws, and install the rear bumper arm reinforcement LH.
11. INSTALL REAR BUMPER ARM REINFORCEMENT RH
HINT
Use the same procedure for the RH side and LH side.
12. INSTALL REAR BUMPER ENERGY ABSORBER
(a) Install the rear bumper energy absorber.