IS 250C V6-2.5L (4GR-FSE) (2011)
13. INSTALL REAR BUMPER PAD LH
(a) Wipe off any tape adhesive residue with cleaner.
(b) Install a new rear bumper pad LH.
Text in Illustration
HINT
Stick the new rear bumper pad LH on the line marked on the rear bumper assembly.
14. INSTALL REAR BUMPER PAD RH
HINT
Use the same procedure for the RH side and LH side.
15. INSTALL REAR BUMPER PROTECTOR LH
(a) Install the rear bumper protector LH.
16. INSTALL REAR BUMPER PROTECTOR RH
(a) Install the rear bumper protector RH.
17. INSTALL REAR BUMPER PIECE LH
(a) Engage the 2 claws and install the rear bumper piece LH.
18. INSTALL REAR BUMPER PIECE RH
HINT
Use the same procedure for the RH side and LH side.
19. INSTALL NO. 3 LUGGAGE ROOM WIRE (w/ Intuitive Parking Assist System)
(a) Engage the 2 clamps and install the No. 3 luggage room wire.
20. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)