IS 250C V6-2.5L (4GR-FSE) (2011)
(2) Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.
6. REMOVE COURTESY LIGHT ASSEMBLY See: Lighting and Horns/Courtesy Lamp/Service and Repair/Vehicle Interior/Door Courtesy
Light/Removal
7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
(a) Remove the 2 screws.
(b) Using a clip remover, disengage the 10 clips.
(c) Raise the front door trim board and remove the front door trim board together with the front door inner glass weatherstrip.
(d) Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.
(e) Disconnect each connector and remove the front door trim board sub-assembly.
8. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP
(a) Disengage the 8 claws and remove the front door inner glass weatherstrip from the front door panel as shown in the illustration.
9. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service
and Repair/Front Door Speaker/Removal
10. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service
and Repair/Front Door Speaker/Removal
11. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY