IS 250C V6-2.5L (4GR-FSE) (2011)
(a) Remove the 3 screws and bracket.
(b) Remove the 4 screws and front door inside handle sub-assembly.
12. REMOVE SEAT MEMORY SWITCH (w/ Seat Position Memory System) See: Mirrors/Memory Positioning Systems/Seat Memory
Switch/Service and Repair/Removal
13. REMOVE FRONT DOOR TRIM COVER
(a) Using a clip remover, disengage the 6 clips and remove the front door trim cover.
14. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service
and Repair/Front Door Speaker/Removal
15. REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY (w/ Memory) See: Mirrors/Power Mirror Control Module/Service and
Repair/Removal
16. REMOVE OUTER MIRROR PROTECTOR See: Mirrors/Service and Repair/Removal and Replacement/Outer Rear View Mirror/Removal
17. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY See: Mirrors/Service and Repair/Removal and Replacement/Outer Rear View
Mirror/Removal
18. REMOVE DOOR SIDE AIRBAG SENSOR See: Restraint Systems/Air Bag Systems/Impact Sensor/Service and Repair/Side Airbag Sensor (for
Front Side)/Removal
19. REMOVE FRONT DOOR SERVICE HOLE COVER
(a) Remove the bolt and disconnect the wire harness.
(b) Disconnect each connector.
(c) Disengage each clamp and remove the front door service hole cover.
HINT
Remove any remaining butyl tape from the door.
20. REMOVE FRONT DOOR UPPER WINDOW STOP
(a) for Front Side: