IS 250C V6-2.5L (4GR-FSE) (2011)
35. REMOVE FRONT DOOR REAR OUTSIDE HANDLE PAD
(a) Disengage the 2 claws and remove the front door rear outside handle pad.
36. REMOVE FRONT DOOR LOCK ASSEMBLY
(a) Using a T30 "TORX" socket wrench, remove the 3 screws.
(b) Sliding the front door lock assembly downward, pull out the front door lock open rod from the outside handle frame, and remove the front door
lock assembly and cables as a unit.
(c) Remove the front door lock open rod from the front door lock assembly.
(d) Remove the door lock wiring harness seal from the front door lock assembly.
37. REMOVE FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY
(a) Remove the front door lock remote control cable assembly.
38. REMOVE FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY
(a) Using a screwdriver, disengage the 3 claws.
HINT
Tape the screwdriver tip before use.
(b) Remove the front door inside locking cable assembly.