IS 250C V6-2.5L (4GR-FSE) (2011)
39. REMOVE FRONT DOOR OUTSIDE HANDLE FRAME SUB-ASSEMBLY
(a) Using a T30 "TORX" socket wrench, remove the screw.
(b) Disconnect the connector.
(c) Disengage the 2 clamps.
(d) Disengage the claw and remove the front door outside handle frame sub-assembly.
40. REMOVE FRONT DOOR LOCK OPEN ROD
(a) Remove the front door lock open rod as shown in the illustration.
41. REMOVE DOOR ELECTRICAL KEY OSCILLATOR See: Locks/Keyless Entry/Antenna - Keyless Entry/Service and Repair/Electrical Key
Oscillator (for Front Door)/Removal
42. REMOVE FRONT DOOR CHECK COVER
(a) Remove the front door check cover.
43. REMOVE FRONT DOOR CHECK ASSEMBLY
(a) Remove the bolt, 2 nuts and front door check assembly.