IS 250C V6-2.5L (4GR-FSE) (2011)
If the result is not as specified, there may be a malfunction on the wire harness side.
3. CHECK MAIN BODY ECU RH (COWL SIDE JUNCTION BLOCK RH)
(a) Disconnect the main body ECU RH (cowl side junction block RH) connectors.
(b) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
4. CHECK MULTIPLEX TILT AND TELESCOPIC ECU