IS 250C V6-2.5L (4GR-FSE) (2011)
(a) Disconnect the multiplex tilt and telescopic ECU connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
5. CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
(a) Disconnect the power window regulator master switch assembly connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
6. CHECK POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Disconnect the power window regulator switch assembly connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.