IS 250C V6-2.5L (4GR-FSE) (2011)
If the result is not as specified, there may be a malfunction on the wire harness side.
14. CHECK RAIN SENSOR (w/ Auto Wiper)
(a) Disconnect the rain sensor connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
15. CHECK POWER SOURCE CONTROL ECU
(a) Disconnect the power source control ECU connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
16. CHECK WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Disconnect the windshield wiper switch assembly connector.