IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-858018.png)
(b) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
17. CHECK COMBINATION METER ASSEMBLY
(a) Disconnect the combination meter assembly connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
18. CHECK CLEARANCE WARNING ECU ASSEMBLY (w/ Intuitive Parking Assist System)
(a) Disconnect the clearance warning ECU assembly connector.
