IS 250C V6-2.5L (4GR-FSE) (2011)
Text in Illustration
NOTICE:
When disconnecting any airbag connector, take care not to damage the airbag wire harness.
3. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
4. REMOVE NO. 3 HEATER TO REGISTER DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Overhaul/Disassembly
5. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Overhaul/Disassembly
6. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
CAUTION:
When storing the front passenger airbag assembly, keep the airbag deployment side facing upward.
(a) Remove the 2 screws.
(b) Disengage the 5 hooks (A).
(c) Disengage the 5 hooks (B) to remove the front passenger airbag assembly from the instrument panel safety pad assembly as shown in the
illustration.
7. REMOVE NO. 2 INSTRUMENT PANEL WIRE
(a) Disengage the 2 clamps.