IS 250C V6-2.5L (4GR-FSE) (2011)
(b) Remove the 2 clamps to disconnect the wire harness from the bracket.
(c) Disconnect the 2 connectors (B) and (C) from the power steering gear assembly.
(d) Release the lock of the connector (D) and disconnect the connector (D) from the power steering gear assembly.
(e) Remove the bolt (E) and power steering earth wire from the power steering gear assembly.
(f) Remove the 2 bolts, 2 washers, 2 nuts, and power steering gear assembly from the front suspension member.
Installation
STEERING GEAR / LINKAGE: STEERING GEAR: INSTALLATION
1. INSTALL POWER STEERING LINK ASSEMBLY
(a) Install the power steering link assembly with the 2 bolts, 2 washers and 2 nuts.
Torque : 118 Nm (1203 kgf-cm, 87 ft-lbf)
(b) Connect the wire harness connector (D) to the power steering link assembly and securely lock the connector.