IS 250C V6-2.5L (4GR-FSE) (2011)
11. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY See: Wheels and Tires/Wheel Fastener/Service and Repair/Front Axle Hub
Bolt/Replacement
12. REMOVE FRONT DISC
for Floating Type Caliper See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front Brake (for
Floating Type Caliper)/Removal
for Opposed Type Caliper See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front Brake (for
Opposed Type Caliper)/Removal
13. SEPARATE FRONT SHOCK ABSORBER WITH COIL SPRING See: Suspension Strut / Shock Absorber/Service and Repair/Front Shock
Absorber/Removal
14. SEPARATE STEERING KNUCKLE WITH AXLE ASSEMBLY See: Suspension Strut / Shock Absorber/Service and Repair/Front Shock
Absorber/Removal
15. REMOVE FRONT LOWER BALL JOINT ASSEMBLY See: Ball Joint/Service and Repair/Removal
16. REMOVE FRONT LOWER SUSPENSION ARM ASSEMBLY
(a) Support the front suspension crossmember sub-assembly with a transmission jack.
Text in Illustration
NOTICE:
Be sure to place a wooden block between the front suspension crossmember sub-assembly and transmission jack.
(b) Loosen the nut of the No. 2 lower arm bracket assembly.
NOTICE:
Do not remove the nut.
(c) Remove the bolt, washer and nut on the front of the front lower suspension arm assembly.