IS 250C V6-2.5L (4GR-FSE) (2011)
(d) Remove the 5 bolts, nut, strut bar bracket reinforcement and front lower suspension arm assembly with the No. 2 lower arm bracket assembly.
17. REMOVE NO. 2 LOWER ARM BRACKET ASSEMBLY
(a) Remove the nut, washer and No. 2 lower arm bracket assembly from the front lower suspension arm assembly.
Installation
FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM: INSTALLATION
HINT
*
Use the same procedure for the LH side and RH side.
*
The following procedure is for the LH side.
1. TEMPORARILY TIGHTEN NO. 2 LOWER ARM BRACKET ASSEMBLY
(a) Temporarily install the No. 2 lower arm bracket assembly to the front lower suspension arm assembly with the nut and washer.
2. TEMPORARILY TIGHTEN FRONT LOWER SUSPENSION ARM ASSEMBLY
(a) Install the front lower suspension arm assembly and strut bar bracket reinforcement with the 5 bolts and the nut.
Bolt 1 - Torque : 204 Nm (2080 kgf-cm, 150 ft-lbf)