IS 250C V6-2.5L (4GR-FSE) (2011)
Bolt 2 - Torque : 86 Nm (877 kgf-cm, 63 ft-lbf)
Bolt 3 - Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)
Bolt 4 - Torque : 34 Nm (347 kgf-cm, 25 ft-lbf)
(b) Temporarily tighten the front lower suspension arm assembly with the bolt, washer and nut.
HINT
Insert the bolt from the front of the vehicle.
3. INSTALL FRONT LOWER BALL JOINT ASSEMBLY See: Ball Joint/Service and Repair/Installation
4. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING
(a) Insert the bolt from the rear of the vehicle, and install the front shock absorber lower side on the front lower suspension arm assembly.
(b) Temporarily tighten the bolt while holding the nut.
5. INSTALL STEERING KNUCKLE WITH AXLE ASSEMBLY See: Suspension Strut / Shock Absorber/Service and Repair/Front Shock
Absorber/Installation
6. INSTALL FRONT DISC
for Floating Type Caliper See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front Brake (for
Floating Type Caliper)/Installation
for Opposed Type Caliper See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front Brake (for
Opposed Type Caliper)/Installation
7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY See: Wheels and Tires/Wheel Fastener/Service and Repair/Front Axle Hub
Bolt/Replacement
8. INSTALL FRONT STABILIZER LINK ASSEMBLY See: Suspension Strut / Shock Absorber/Service and Repair/Front Shock
Absorber/Installation
9. CONNECT HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY (w/ HID Headlight System) See: Suspension Strut / Shock
Absorber/Service and Repair/Front Shock Absorber/Installation
10. CONNECT FRONT SPEED SENSOR WIRE See: Suspension Strut / Shock Absorber/Service and Repair/Front Shock Absorber/Installation
11. INSTALL NO. 2 ENGINE UNDER COVER
12. INSTALL NO. 1 BODY MOUNTING BRACKET SUB-ASSEMBLY LH