IS 250C V6-2.5L (4GR-FSE) (2011)
(b) Install SST to the rear coil spring so that the distance between the upper and lower hooks is as wide as possible within the installation area.
SST : 09727-30021
09727-00010
09727-00021
09727-00031
(c) Compress the rear coil spring until it can be moved freely.
NOTICE:
Do not use an impact wrench. It will damage SST.
(d) Remove the rear support to rear shock absorber nut.
(e) Remove the rear No. 1 shock absorber cushion washer, rear No. 1 shock absorber cushion, rear suspension support assembly, rear upper coil
spring insulator, collar, rear No. 2 shock absorber cushion and rear No. 1 spring bumper.
(f) Remove the rear coil spring with SST and rear lower coil spring insulator from the rear shock absorber assembly.
(g) Release SST and remove it from the rear coil spring.
Installation
REAR SUSPENSION: REAR SHOCK ABSORBER: INSTALLATION
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. INSTALL REAR SHOCK ABSORBER ASSEMBLY
(a) Install the rear lower coil spring insulator to the rear shock absorber assembly so that both recessed parts are aligned.
Text in Illustration
(b) Using SST, compress the rear coil spring.
SST : 09727-30021
09727-00010
09727-00021
09727-00031