LS 460 V8-4.6L (1UR-FSE) (2007)
c. Lightly pull up on the retainer while heating it until it begins to come off bumper and remove it while heating at the same temperature.
-
Wear cotton gloves to prevent burn injuries burned.
3. REMOVING THE ADHESIVE
a. Remove the remaining adhesive with a putty spatula. (no heating is necessary)
b. Degrease the surface.
4. CLEAN THE BUMPER COVER
NOTE:
-
When there is any dirt such as oil, dust and tape residue on the bumper cover, wipe it off using cloth, gauze, etc. that is soaked with
non-residue solvent.